Comfit Panning Machines

Tunnel 300-400
Can be used with Plus Ex, Futura Ex and Top Ex
Designed for the artisanal needs of patisseries and chocolateries
Machine is entirely controlled via a touch screen
Heated coating area (day and night) Can be connected to a detacher
Option to modify to three phase 220 V – 50/60 Hz
The production speed of this machine ranges from 20 to 150 cm/min. The Tunnel 400 has a completely integrated coating section which is easily assembled and washed. The machine was designed to allow working with more than one tempering machine, which can be swapped over upon changing the colour of the coating.
Power: 400V/50Hz/3Ph + N – 2.8 kW, Dimensions: L. 4800 mm x W. 850 mm, Working width: 200/250 mm

Tunnel 800-1200
Designed for large workshops and small/medium industries
This machine can be used simultaneously for coatings and mouldings
Can be connected to a detacher
Option to modify to three phase 220 V – 50/60 Hz
Designed to coat and cool coated and moulded products using a special air diffuser positioned over the whole length of the cold chamber. The production speed ranges from 30 to 200 cm/min. The TUNNEL 800/1200 has a completely integrated coating section which can be easily removed and washed. The machine was designed to allow working with more than one tempering machine, which can be swapped over upon changing the colour of the coating.
Electrical specification: 400V/50Hz/3Ph- 4 Kw, Dimensions: L. 8000/12000 mm x W. 850 mm, Working width: 300/400 mm

Tunnel Doppia (Double Decker)
Can be used with Top Ex Machine is entirely controlled via a touch screen Heated coating area (day and night) Can be connected to a detacher Option to modify to three phase 220 V – 50/60 Hz An innovative machine created to satisfy the ever increasing needs for multifunctional machines. In one direction this cooling tunnel coats pralines, cakes, breadsticks, snacks, etc, with the same specifications as the previous coating devices, but on a separate level it also has a belt moving in the opposite direction within the cooling tunnel which allows for the processing with an automatic Transfer polycarbonate mould loader (external size 275 x 175 mm); this works by firstly running the products on the upper cooling level for 8 metres and then passing the moulds to the lower level which brings them back to the starting point via a polycarbonate belt. The advantage is clear: this patented system transforms an 8 metre covered tunnel into a 16 metre one, hence doubling the cooling times, product quality and productivity. We recommend the installation of the detacher at the opposite side to the coating belt. 400V/50Hz/3Ph + N – 9 Kw, Dimensions: L. 6000/12000 mm X W. 850 mm, Working width: 300 mm